Atomic 3000 Watt DMX Xenon Strobe Light

0.00
0.00
  

Atomic 3000 Watt DMX Xenon Strobe Light


Voltage: AC220V 50Hz
Frequency: 50Hz-60Hz    
Lamp : Xenon XOP- 3000W     
Lamp power:3000W
Control mode:Auto/DMX512:1/3/4 channels mode   
Connectable in series and operated in phase   Speed adjustable     
Size:550*220*330mm
Weight:8.5KG
Warm Prompt:This light only can working under AC220V
 
Parameters:
 
. 3000 W long-life Xenon lamp included
. 5600 K color temperature
. Continuous blinder effect with auto fade
. Quiet temperature-controlled fan cooling
. Smart integrated heat control eliminates cool down time
. Atomic Detonator remote control, socket kit for lamp change
. Auto-ranging power supply (100-240 V, 50/60 Hz)
. DMX, stand-alone, master/slave or Detonator remote control
 
Intensity 
Flash intensity is controlled from minimum (blackout) to maximum with the Intensity fader.
The maximum intensity is reduced in low power mode, which is selected on pin 6 of the Mode DIP switch.
Flash Rate
Flash rate is controlled from 0 to 25 flashes per second on 50Hz power supplies, or 0 to 30 flashes per second on 60Hz power supplies, with the flash rate fader. The Run/Stop button toggles continuous flashing on and off. The indicator diode is green when running and red when stopped.
Chase/Sync 
The Chase/Sync button toggles between staggered and simultaneous flashing of multiple fixture. The indicator diode blinks in chase mode and remains on in Sync mode.
Blinder Effect
The blinder effect is controlled with the momentary Blinder Effect button. The intensity is controlled with the Intensity fader. Lamp power is electronically regulated to prevent the lamp from overheating.
Single Flash
Single flashes can be achieved by pressing the Single Flash button with continuous flash stopped.
The flash rate cycle can be restarted, for example to synchronized with a beat, by pressing the Single Flash button while continuous flash is running
 

Copyright Fengtexi Technology Co., Ltd All Rights Reserved